Keypad Programming Instructions

Overhead Door™ Keypad Programming

Get access to your garage with keyless entry! Instructions below on the following operators: Odyssey, Destiny, Legacy, or Phantom to your keypad!

If you need further assistance, give us a call 608-783-6080 we can help!

1. Program the keypad for the first time* with a Personal Identification Number (PIN). This PIN must be 3 to 8 digits.
2. Ensure number pad back lighting is off.
3. Press 3-5-7 in sequence.
4. Press PROGRAM key. LED will blink once per second.
5. Enter a PIN number (3-8 digits).
6. Press PROGRAM key. LED will blink twice and shut off.

STEP 2) PROGRAMMING THE KEYPAD TO 1 OPENER

1. Place garage door opener into PROGRAMMING MODE. Locate the Learn Code button. (Odyssey/Destiny: Press the black square button until it turns purple) (Legacy: Press the black or red button 1x until it flashes red)
2. Ensure number pad back lighting is off.
3. Enter the PIN number on keypad.
4. Press the UP/DOWN key 3 to 4 times slowly until garage door opener operates.